"Organization Disaster" |
I was able to make two organizers for less than $10. However, if you can "upcycle" an old picture frame, this project would cost even less. The following directions explain how I assembled both an 8x10 wall-mounted and a 5x7 dresser top jewlery organizer:
Supplies Needed:
"What you need" |
Burlap fabric (enough to cover frame opening)
Hot glue gun and glue
Staple Gun
⅜” Staples
20 guage wire
Small eye hooks (optional)
Directions (8x10 necklace and dangle earrings):
1. Remove glass and backing to the picture frame2. Stretch Wire across the frame opening
3. Apply Glue to the edges of the frame
4. Press edges of the burlap securely into the glue, over the wire (pulling the burlap taunt)
5. Trim the excess burlap
6. Insert staples along the edge of burlap where needed to help secure
7. Replace the frame backing for hanging on the wall
8. Hooks were added to the bottom of the frame for bracelets and other necklaces
3. Apply Glue to the edges of the frame
4. Press edges of the burlap securely into the glue, over the wire (pulling the burlap taunt)
5. Trim the excess burlap
6. Insert staples along the edge of burlap where needed to help secure
7. Replace the frame backing for hanging on the wall
8. Hooks were added to the bottom of the frame for bracelets and other necklaces
Directions (5x7 post earrings):
1. Follow steps 1-6 above
2. Do not add the frame backing in order to access the back of the earrings
2. Do not add the frame backing in order to access the back of the earrings
Finished Jewelry Organizers |
No comments:
Post a Comment