6/12/2014

DIY Pacifier Clip


Material Needed:
  • 1” Metal Suspender/Pacifier Clip (a multi-pack can be found online for under $5)
  • 4” x 15” of chosen fabric
  • 1” x 1/2” velcro rectangle
  • coordinating Thread

Instructions

  1. Sew a ¼” hem on each short edge
  2. Iron material in half long ways
  3. Fold long edges to center and iron again
  4. Fold back in half
  5. Sew along the long edges of material
  6. Pull the end through the metal pacifier clip, and zig-zag stitch the end in place (use several forward and backward stitches to secure it).
  7. Lay the clip face down
  8. Fold 2” from the end back, and mark where the velcro will go
  9. Attach velcro to where you marked





No comments:

Post a Comment